mission mud pumps

Description

• Slurry pump structure: L type slurry pump for light cantilever, axial horizontal double suction centrifugal slurry pump. The outlet position of the pump can be installed at eight different angles according to the requirement and rotated at 45 DEG C intervals.
• Slurry pump material: L light duty slurry pump body with replaceable wear-resistant metal lining, impeller, sheath, retaining plate and other over-current components are wear-resistant metal.
• Slurry pump: compared with heavy duty slurry pump, the pump has high rotational speed, small size and light weight. It is suitable for conveying fine particles, low concentration slag slurry or corrosive slag slurry. The weight of the slurry is generally not more than 30%, and it can also be used to transport high concentration and low abrasive slurry.
• Seal type: L type pump seals can use packing seal, Deputy impeller seal, packing plus side impeller seal, mechanical seal and other types.
• Drive type: DC direct drive, CR parallel belt drive, ZVZ upper and lower belt drive, CV vertical belt drive and other types.

Applications

• Thickener Overflow
• Paper and Pulp
• Slag Granulation

Structure ＆ Material

The numbers of the main parts

PERFORMANCE

Features

• Mission sand pump is used to provide drilling fluid with desander and desilter, in addition to the mud pump discharge capacity and pressure. The centrifugal pump through the field application and improvement of more than 10 years, in the domestic advanced level, both in the technical performance and seal life, reach the level of similar foreign products.
• The mission centrifugal pump / pump centrifugal pump pump / task 2500 highest, the main task of sand / pump centrifugal pump
• Casing, casing, washer, nut, stud, casing, casing, casing plug / washing / line / impeller impeller seal, gasket, bolt / impeller, impeller lock packing box, stuffing seal / mechanical / packaging / / / nozzle / bolts, stuffing box cover assembly / packaging / mechanical seal packing / BackupPacking / shaft / Zhang ring - Latemu / bolt assembly, gland / sleeve / seal / sleeve / oil ring and pin board / component / framework grease / plug leakage / bolt / breather frame Jack cover/ bearing inner casing/Gasket / cover oil seal / fitting / bearing, inner / nut / cover, O ring / oil seal / washer / lock nut​

4×3×13 mission centrifugal sand pump is usually used as measuring pump or replenishment pump

Product introduction

• Mission pump, a reliable, high power, low cost mud pump. Unique concentric round shell and wide impeller design, so that the centrifugal pump shows a wear resistance, long service life characteristics, and the use of maintenance costs are very low. Concentric circles are designed to reduce vibration and turbulence, because they cause great wear when pumped into drilling fluids containing solid solids. This design can also relieve high load and shaft deviation of pump.
• The wide impeller design of the mission pump can reduce the speed of the liquid from the blade, and the design of the narrow blade will make the hard substance of the drilling fluid exert a great impact on the blade, while the wide blade design will not happen.
• In addition, the MISSION pump is also equipped with a large load shaft, larger than the average diameter of the pump, but also extended the service life. You can even connect the shaft with the belt directly to drive the centrifugal pump.
• The main material of MISSION pump is high hardness steel, stainless steel and bronze. It can be driven by an electric motor, a diesel engine or a hydraulic motor. We can provide the whole machine or separate pump head and fittings to meet the needs of users

Features

Mission universal control silica sand pump for mining and construction, papermaking, textile, food, feed and other industries;

The mission of universal pump function:

1. Single stage single suction
2. Haft open impeller
3. Anti abrasive material, high chromium alloy (flow part)
4. The impeller is adjustable with the protection plate.
5. Marx density: 50-60 (by weight)
6. Easy installation
7. Efficient work

Pump Parameters

Common application

Barite, ferric oxide and mineral oil base drilling muds
Glass fibers
Sugar processing
Ash or coal conveyors
Cement
Minede-watering
Lime slurries

Features

1. Open impeller, suitable for transporting high viscosity of drilling fluid;
2. The combination sealing, long service life;
3. All types of centrifugal pump bearing, shaft parts etc interchangeable, easy maintenance, saving cost;
4. The main components are wear resistant ductile iron, precision casting resin sand, long service life, beautiful appearance.