Home ProductsHigh Pressure Multistage Centrifugal Pumps

multistage horizontal centrifugal pump

Certification
Good quality Centrifugal Slurry Pump for sales
The quality of the product is very good

—— David

A trustworthy manufacturer Later will cooperate

—— Peter

The supplier will pick you up later

—— Lisa

I'm Online Chat Now

multistage horizontal centrifugal pump

D 6-25 Multistage Horizontal Centrifugal Pump 3.75~7.5 m3/h Flow

  • D 6-25 Multistage Horizontal Centrifugal Pump 3.75~7.5 m3/h Flow
Product Details:

D 6-25 Multistage Horizontal Centrifugal Pump 3.75~7.5 m3/h Flow


Description

  • D, DF, DY type horizontal multi-stage centrifugal pump horizontal single-suction multi-stage segmental vertical centrifugal pump.
  • Type D is used for conveying liquid without solid particles, the temperature is below 80 ℃ water or similar physical and chemical property of Yu Qingshui liquid.Suitable for mines, factories and urban water supply and drainage engineering.
  • Type DF is used for conveying liquid without solid particles, the temperature is -20 ℃ ~ 105 ℃ corrosive liquid.Users according to the name of the medium, concentration, proportion, temperature and reasonable choose the material of pump, such as the pump inlet pressure seal form, the structure of the pump and determine the motor capacity, etc.
  • Type DY is used for conveying liquid without solid particles, temperature is -20 ℃ ~ 105 ℃, the viscosity - less than 120 centipoise oil and oil products.


Features

  • advanced hydraulic model, high efficiency, wide range of performance.
  • pump running smoothly, low noise.
  • seal with soft packing seal or mechanical seal, sealing safety and reliability, simple structure, easy maintenance.
  • the shaft is a fully sealed structure, to ensure that no contact with the media, not rust, long service life.


Model Significance


Such as D600-60 x 6, DF600-60×6, DY600-60×6
D - multistage centrifugal water pump
DF - corrosion resistance multistage centrifugal pump
DY - multistage centrifugal pump
600 - the design flow rate is 600 m³/h
60 - design point single-stage head is 60 m
6 - series for level 6


Such as 150 d30 x 7
150 - the pump inlet diameter is 150 mm
D - multistage centrifugal pumps
30 - single-stage pump design head of 30 m
7- level7

TSWA series horizontal multi-stage centrifugal pump 18.4 ~ 270 m Head

  • TSWA series horizontal multi-stage centrifugal pump 18.4 ~ 270 m Head
Product Details:

Horizontal multistage mining high pressure centrifugal water pump

  • Horizontal multistage mining high pressure centrifugal water pump
Product Details:

Overview Description


D type pump is used for conveying water without solid particles, water temperature below 80℃ or physical and chemical properties similar to clean water.


DF type pump is used for the delivery of -20 ~105℃, fluid does not contain solid particles, corrosive liquid, the inlet pressure of the pump is max 0.6MPa.


DM type is used for conveying Neutral mineral water,solid particles should be less than 1.5% (particle size less than 0.5 mm) and other similar wastewater, the transported medium temperature is not higher than 80℃, suitable for iron and steel plant, mine drainage, sewerage and other occasions.

 

 

Performance range:

The flow rate Q:6.3~600m fand /h
Lift Head:17~850m

Material:cast iron or stainless steel ss304/316

Model:Horizontal

Drive:motor or diesel

Seal: packing seal,mechanical seal

Usage:high lift,boiler feed,irrigation

Outlet diameter:DN50-DN200mm

Power:2.2Kw-400Kw

 

 

Model description:

100 D 16 * 3
100 is the pump inlet diameter
D is a multistage centrifugal pump
16 is a single pump designed point lift

D series multi-stage centrifugal pump product features:

a. advanced hydraulic model, high efficiency, wide range of performance.
b. pump running smoothly, low noise.
c. seal with soft packing seal or mechanical seal, sealing safety and reliability, simple structure, easy maintenance.

 

The shaft is a fully sealed structure, to ensure that no contact with the media, not rust, long service life.

 

D 6-50 Multistage High Pressure Centrifugal Pump 90~728 m Head

  • D 6-50 Multistage High Pressure Centrifugal Pump 90~728 m Head
Product Details:

 

Description

 

  • D, DF, DY type horizontal multi-stage centrifugal pump horizontal single-suction multi-stage segmental vertical centrifugal pump.
  • Type D is used for conveying liquid without solid particles, the temperature is below 80 ℃ water or similar physical and chemical property of Yu Qingshui liquid.Suitable for mines, factories and urban water supply and drainage engineering.
  • Type DF is used for conveying liquid without solid particles, the temperature is -20 ℃ ~ 105 ℃ corrosive liquid.Users according to the name of the medium, concentration, proportion, temperature and reasonable choose the material of pump, such as the pump inlet pressure seal form, the structure of the pump and determine the motor capacity, etc.
  • Type DY is used for conveying liquid without solid particles, temperature is -20 ℃ ~ 105 ℃, the viscosity - less than 120 centipoise oil and oil products.

 

Features

  • advanced hydraulic model, high efficiency, wide range of performance.
  • pump running smoothly, low noise.
  • seal with soft packing seal or mechanical seal, sealing safety and reliability, simple structure, easy maintenance.
  • the shaft is a fully sealed structure, to ensure that no contact with the media, not rust, long service life.

Model Significance


Such as D600-60 x 6, DF600-60×6, DY600-60×6
D - multistage centrifugal water pump
DF - corrosion resistance multistage centrifugal pump
DY - multistage centrifugal pump
600 - the design flow rate is 600 m³/h
60 - design point single-stage head is 60 m
6 - series for level 6


Such as 150 d30 x 7
150 - the pump inlet diameter is 150 mm
D - multistage centrifugal pumps
30 - single-stage pump design head of 30 m
7- level7

 
Contact Details
Shijiazhuang JieMu Machinery Equipment Co.,Ltd

Contact Person: Mr.

Tel: 86-311-80660278

Send your inquiry directly to us (0 / 3000)