|
Warman Centrifugal Slurry Pump 3/2 C-Ah Slurry Pump Spare parts
Main Pump parts
Impeller, Volute liner, bearing assembly, adjust screw, clamp washer, bolt
Material
Pump Casing: Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety. High efficiency, high head and OEM designs are also available.
MAIN PUMP SERIES
AH series | L(R) ,M | HH | SP(R) | G |
3/2C-AH(R) | 75C-L | 4/3E-HH | 100RV-SP(R) | 10/8F-G |
12/10ST-AH(R) | 8/6S-HP | |||
14/12ST-AH(R) | 8/6X-HP | |||
16/14TU-AH(R) |
2/1.5b-Ah High chrome warman pump parts 316 Stainless Steel
Main Pump parts
frame plate, cover plate, expeller, Expeller ring, labyrinth, keeper plate
Material
Liner: High chrome alloy and Nature rubber liners are completely interchangeable. Easily replaceable liners are bolted, not glued, to the casing for positive attachment and east of maintenance
MAIN PUMP SERIES
AH series | L(R) ,M | HH | SP(R) | G |
1.5/1B-AH(R) | 20A-L | 1.5/1 C-HH | 40PV-SP(R) | 6/4D-G |
2/1.5B-AH(R) | 50B-L(R) | 3/2D-HH | 65QV-SP(R) | 8/6E-G |
Honstar Material Code | Material Name | Applications |
Abrasion Resistant Alloy | ||
HA06 | Ni-Hard 4 | Impeller, Liners, etc. |
HA07 | 15/3 Cr-Mo Alloy | Impeller, Liners, etc. |
Corrosion Resistant Alloy | ||
HC23 | 316 Stainless Steel | Impeller, Liners, Shaft Sleeve, Stuffing Box, Expeller Ring, Expeller, Bolt, etc. |
Engineering Steel | ||
HE05 | K1045 Carbon Steel | Shaft, Bolts, etc. |
Grey Iron | ||
HG02 | Grade T260 | Cover Plate, Frame Plate, Base, Bearing Housing, Stuffing Box, Expeller Ring, Expeller, etc. |
Natural Rubber | ||
HR55 | Polyisoprene | Impeller, Liners, Expeller Ring, Expeller, etc. |
Plastic | ||
HP50 | Polyphenylene Sulphide | Lantern Ring, Lantern Restrictor |
Synthetic Rubber | ||
HS10 | Nitrile Rubber | Seals, etc. |
HS31 | Chlorosulfonated Polyethylene | Impeller, Liners, Expeller Ring, Expeller, etc. |
4/3 D-Ah centrifugal pump parts / diaphragm pump parts ISO 9001
Main Pump parts
gland assembly, base, shaft sleeve, stuffing box, shaft spacer
Material
Bearing assembly: A large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.
MAIN PUMP SERIES
AH series | L(R) ,M | HH | SP(R) | G |
4/3C-AH(R) | 100 D-L | 4/3X-HH | 150SV-SP(R) | 10/8S-G |
10/8F-AH(R) | 8/6X-H | |||
10/8X-AH(R) | 6S-HP | |||
Applications:
Heavy duty slurry pump is mainly used for conveying strong abrasive or corrosive slurry, suitable for power, metallurgy, mining, coal, building materials, chemical and other industrial sectors of the slurry transport.
Performance range:
Flow rate: Q = 30.2 ~ 1920m3 / h (8.4 ~ 533.3l / s)
Head: H = 16.46 ~ 94.2m
Features: single-stage, single suction, cantilever, horizontal structure
----------- wear resistance, high head, high efficiency, good anti-cavitation
----------- Pump head for the double structure, the inner wear, the outer pressure
----------- Swedish SKF bearings, reliable operation, long service life
----------- bearing with thin oil lubrication, to meet the requirements of high power use
----------- With axial adjustment nut, easy to adjust the axial
----------- Modular structure design, easy disassembly and maintenance
----------- Shaft seal with packing seal, auxiliary impeller seal, mechanical seal and other sealing methods
----------- Direct drive or belt indirect drive, and can use frequency converter, hydraulic coupling or gearbox speed
----------- The spouting position can be rotated by 45 ° by eight different positions
----------- can be used in multiple stages, allowing maximum working pressure of 3.6MPa
Complete sets of range: pumps, motors, installation accessories, control systems, spare parts spare parts
65QV-SP Spare parts Warman Centrifugal Slurry Pump 44-200 mm Discharge size
Description
Applications
Main parts
1 – Discharge Pipe 2 – Column
3 – Strainer 4 – Back Liner
5 – Impeller 6 – Pump Casing
7 – Lower Pipe
IMPELLERS | CASING | COLUMN | DISCHARGE | SEALS | |
Standard | High Chrome Alloy Rubber | High Chrome Alloy Rubber | Mild Steel Mild Steel Rubber Lined |
Mild Steel Mild Steel Rubber Lined |
Natural Rubber Rubber |
Options | Butyl EPDM Hypalon Polyurethane 316 SS W 151 |
Neoprene Butyl EPDM Hypalon Nitrile 316 SS W 151 |
Neoprene Butyl Nitrile 316 SS |
Neoprene Butyl Nitrile 316 SS |
Nordel Neoprene Viton Hypalon Butyl EPDM |
Contact Person: Mr.
Tel: 86-311-80660278