Home ProductsHigh Pressure Multistage Centrifugal Pumps

multistage high pressure centrifugal pump

Certification
Good quality Centrifugal Slurry Pump for sales
The quality of the product is very good

—— David

A trustworthy manufacturer Later will cooperate

—— Peter

The supplier will pick you up later

—— Lisa

I'm Online Chat Now

multistage high pressure centrifugal pump

D 6-50 Horizontal Multistage High Pressure Centrifugal Pump 90~728 m Head

  • D 6-50 Horizontal Multistage High Pressure Centrifugal Pump 90~728 m Head
Product Details:

 

Description

 

  • D, DF, DY type horizontal multi-stage centrifugal pump horizontal single-suction multi-stage segmental vertical centrifugal pump.
  • Type D is used for conveying liquid without solid particles, the temperature is below 80 ℃ water or similar physical and chemical property of Yu Qingshui liquid.Suitable for mines, factories and urban water supply and drainage engineering.
  • Type DF is used for conveying liquid without solid particles, the temperature is -20 ℃ ~ 105 ℃ corrosive liquid.Users according to the name of the medium, concentration, proportion, temperature and reasonable choose the material of pump, such as the pump inlet pressure seal form, the structure of the pump and determine the motor capacity, etc.
  • Type DY is used for conveying liquid without solid particles, temperature is -20 ℃ ~ 105 ℃, the viscosity - less than 120 centipoise oil and oil products.

 

Features

  • advanced hydraulic model, high efficiency, wide range of performance.
  • pump running smoothly, low noise.
  • seal with soft packing seal or mechanical seal, sealing safety and reliability, simple structure, easy maintenance.
  • the shaft is a fully sealed structure, to ensure that no contact with the media, not rust, long service life.

Model Significance


Such as D600-60 x 6, DF600-60×6, DY600-60×6
D - multistage centrifugal water pump
DF - corrosion resistance multistage centrifugal pump
DY - multistage centrifugal pump
600 - the design flow rate is 600 m³/h
60 - design point single-stage head is 60 m
6 - series for level 6


Such as 150 d30 x 7
150 - the pump inlet diameter is 150 mm
D - multistage centrifugal pumps
30 - single-stage pump design head of 30 m
7- level7

 

DF Type Multistage High Pressure Centrifugal Pump For Mine / Factories Corrosion Resistant

  • DF Type Multistage High Pressure Centrifugal Pump For Mine / Factories Corrosion Resistant
Product Details:

DF type multistage high pressure centrifugal pump for mine / factories

 

 

DF-type corrosion-resistant centrifugal pump Overview:

 

DF type pump is a single suction, multi-stage, segment corrosion-resistant centrifugal pump, suitable for conveying non-solid particles of corrosion-resistant liquid. The conveying medium temperature is -20 ℃ ~ 105 ℃, allowing the inlet pressure to be 0.6MPa.

 

 

DF type corrosion-resistant centrifugal pump number Description:

 

DF25-50 × 5

"DF" - that single suction, multi-stage, segmented corrosion-resistant centrifugal pump.

"25" - indicates the pump flow (m3 / h).

"50" - indicates pump single stage head (m).

"5" - indicates the number of stages.

 

 

DF type corrosion-resistant centrifugal pump structure type:

 

DF type pumps for horizontal installation. In addition to the DF155-30 pump inlet direction is horizontal, the other pump suction inlet vertical upward. The DF direction of all DF pumps is vertical upwards. Shaft seal generally used packing seal, according to user needs can also use the mechanical seal. In addition to DF85-67 type pump with the sliding bearing thin oil lubrication, DF155-67 type pump with rolling bearing thin oil lubrication, the rest using rolling bearings, grease lubrication. Pump axial force in addition to DF3-40 Ⅱ type pump with a symmetrical arrangement of the way to balance the balance, the rest are balanced plate mechanism to balance.

 

 

DF-type corrosion-resistant centrifugal pump Rotation direction:

 

The pump's rotation is clockwise from the prime mover.

 

 

DF-type corrosion-resistant centrifugal pump main parts Material:

 

The flow of components of the pump is made of cast steel and cast stainless steel. The order should be based on the name, concentration, inlet pressure, operating temperature, corrosion degree of the material, reasonable selection of pump material, seal type and pump structure The

 

 

DF-type corrosion-resistant centrifugal pump sets of range:

 

Including spouting taper tube, gate valve, check valve and spare parts (including the impeller, seal ring, guide vane cover, balance plate, shaft, and other parts set

DF / DY 12-25 Horizontal Multi Stage Centrifugal Pump High Pressure High Efficiency

  • DF / DY 12-25 Horizontal Multi Stage Centrifugal Pump High Pressure High Efficiency
Product Details:

DF / DY 12-25 Multistage High Pressure Pumps 7 ~ 14 m3/h Flow


Description

  • D, DF, DY type horizontal multi-stage centrifugal pump horizontal single-suction multi-stage segmental vertical centrifugal pump.
  • Type D is used for conveying liquid without solid particles, the temperature is below 80 ℃ water or similar physical and chemical property of Yu Qingshui liquid.Suitable for mines, factories and urban water supply and drainage engineering.
  • Type DF is used for conveying liquid without solid particles, the temperature is -20 ℃ ~ 105 ℃ corrosive liquid.Users according to the name of the medium, concentration, proportion, temperature and reasonable choose the material of pump, such as the pump inlet pressure seal form, the structure of the pump and determine the motor capacity, etc.
  • Type DY is used for conveying liquid without solid particles, temperature is -20 ℃ ~ 105 ℃, the viscosity - less than 120 centipoise oil and oil products.


Features

  • advanced hydraulic model, high efficiency, wide range of performance.
  • pump running smoothly, low noise.
  • seal with soft packing seal or mechanical seal, sealing safety and reliability, simple structure, easy maintenance.
  • the shaft is a fully sealed structure, to ensure that no contact with the media, not rust, long service life.

Model Significance


Such as D600-60 x 6, DF600-60×6, DY600-60×6
D - multistage centrifugal water pump
DF - corrosion resistance multistage centrifugal pump
DY - multistage centrifugal pump
600 - the design flow rate is 600 m³/h
60 - design point single-stage head is 60 m
6 - series for level 6


Such as 150 d30 x 7
150 - the pump inlet diameter is 150 mm
D - multistage centrifugal pumps
30 - single-stage pump design head of 30 m
7- level7

Performance

  • Product categories: multi-stage pump
  • Diameter (inlet/outlet) : from 40-300 mm
  • Flow range: 5-800 m3 / h
  • Lift range: 12-60 m
  • Power:2.2Kw-400Kw

D(DF/DY)12-25 Performance Parameter

Level Flow Q Head Speed η shaft power Motor   Impeller Pump Moter
H n (%) N NPSHr Diameter weight weight
(m) (r/min)   (kw) (m) D (kg) (kg)
m³/h L/s         power(kw) Type   (mm)    

 

0     56.4 2950   2.62 5.5 Y132S1-2   146 78.7 64
    50   3.15  
    46   3.55  
3     84.6   3.93 7.5 Y132S2-2   87.3 70
    75   4.73  
    69   5.32  
4     112.8   5.24 11 Y160M1-2   95.9 117
    100   6.3  
    92   7.09  
5     141   6.55 11 Y160M1-2   104.4 117
    125   7.88  
    115   8.86  
6     169.2   7.85 15 Y160M2-2   113 125
7.5 2.08 150 44 9.46 2
    138   10.64  
7     197.4   9.16 15 Y160M2-2   121.5 125
12.5 3.47 175 54 11 2
    161   12.41  
8     225.6   10.47 18.5 Y160L-2   130.1 147
15 4.17 200 53 12.61 2.5
    184   14.18  
9     253.8   11.78 18.5 Y160L-2   138.6 147
    225   14.18  
    207   15.95  
10     282   13.09 22 Y180M-2   147.2 180
    250   15.76  
    230   17.73  
11     310.2   14.4 22 Y180M-2   155.7 180
    275   17.34  
    153   19.5  
12     228.4   15.7 30 Y200L1-2   164.3 240
    300   18.9  
    276   21.3  

 

Horizontal Multistage High Pressure Centrifugal Pump For High Lift / Boiler Feed

  • Horizontal Multistage High Pressure Centrifugal Pump For High Lift / Boiler Feed
Product Details:

Overview Description


D type pump is used for conveying water without solid particles, water temperature below 80℃ or physical and chemical properties similar to clean water.


DF type pump is used for the delivery of -20 ~105℃, fluid does not contain solid particles, corrosive liquid, the inlet pressure of the pump is max 0.6MPa.


DM type is used for conveying Neutral mineral water,solid particles should be less than 1.5% (particle size less than 0.5 mm) and other similar wastewater, the transported medium temperature is not higher than 80℃, suitable for iron and steel plant, mine drainage, sewerage and other occasions.

 

 

Performance range:

The flow rate Q:6.3~600m fand /h
Lift Head:17~850m

Material:cast iron or stainless steel ss304/316

Model:Horizontal

Drive:motor or diesel

Seal: packing seal,mechanical seal

Usage:high lift,boiler feed,irrigation

Outlet diameter:DN50-DN200mm

Power:2.2Kw-400Kw

 

 

Model description:

100 D 16 * 3
100 is the pump inlet diameter
D is a multistage centrifugal pump
16 is a single pump designed point lift

D series multi-stage centrifugal pump product features:

a. advanced hydraulic model, high efficiency, wide range of performance.
b. pump running smoothly, low noise.
c. seal with soft packing seal or mechanical seal, sealing safety and reliability, simple structure, easy maintenance.

 

The shaft is a fully sealed structure, to ensure that no contact with the media, not rust, long service life.

 

D 6-25 Multistage Horizontal Centrifugal Pump Single Suction 3.75~7.5 M3/H Flow

  • D 6-25 Multistage Horizontal Centrifugal Pump Single Suction 3.75~7.5 M3/H Flow
Product Details:

D 6-25 Multistage Horizontal Centrifugal Pump 3.75~7.5 m3/h Flow


Description

  • D, DF, DY type horizontal multi-stage centrifugal pump horizontal single-suction multi-stage segmental vertical centrifugal pump.
  • Type D is used for conveying liquid without solid particles, the temperature is below 80 ℃ water or similar physical and chemical property of Yu Qingshui liquid.Suitable for mines, factories and urban water supply and drainage engineering.
  • Type DF is used for conveying liquid without solid particles, the temperature is -20 ℃ ~ 105 ℃ corrosive liquid.Users according to the name of the medium, concentration, proportion, temperature and reasonable choose the material of pump, such as the pump inlet pressure seal form, the structure of the pump and determine the motor capacity, etc.
  • Type DY is used for conveying liquid without solid particles, temperature is -20 ℃ ~ 105 ℃, the viscosity - less than 120 centipoise oil and oil products.


Features

  • advanced hydraulic model, high efficiency, wide range of performance.
  • pump running smoothly, low noise.
  • seal with soft packing seal or mechanical seal, sealing safety and reliability, simple structure, easy maintenance.
  • the shaft is a fully sealed structure, to ensure that no contact with the media, not rust, long service life.


Model Significance


Such as D600-60 x 6, DF600-60×6, DY600-60×6
D - multistage centrifugal water pump
DF - corrosion resistance multistage centrifugal pump
DY - multistage centrifugal pump
600 - the design flow rate is 600 m³/h
60 - design point single-stage head is 60 m
6 - series for level 6


Such as 150 d30 x 7
150 - the pump inlet diameter is 150 mm
D - multistage centrifugal pumps
30 - single-stage pump design head of 30 m
7- level7

Contact Details
Shijiazhuang JieMu Machinery Equipment Co.,Ltd

Contact Person: Mr.

Tel: 86-311-80660278

Send your inquiry directly to us (0 / 3000)