horizontal multistage centrifugal pump

DL series vertical Multistage High Pressure Pumps stainless steel Material

Description

• DL vertical multistage centrifugal pump IS used it IS recommended to use energy efficient products IS type of pump hydraulic model, the structure of vertical multistage multi stages.
• Screw the water clamping couple, middle, water paragraphs.
• Each level in an impeller, a pump water.
• Axial force hydraulic balance method is used to solve, the residual axial force shaft bearing, ball with grease lubrication.
• Adopt soft packing or mechanical seal of the shaft sealing system.
• Execute JB/T2727-93 "vertical multistage centrifugal pump type and basic parameters" standard, mainly for carrying the dilution, clean, no corrosion, no explosion of water and physical and chemical properties similar to water in the liquid without solid particles or fibers.

Features

• Advanced hydraulic model, high efficiency, and wide performance.
• Novel structure, reliable operation, canceled the balancing drum, the axial force by hydraulic balance, thoroughly solved the balancing drum easy to rust, easy to bite dead, easy to wear problems, ensure the operation more reliable.
• Less operation, maintenance cost, high-quality mechanical seal, wear resistance, no leakage and long service life, low failure rate, maintenance cost less operation.
• Smooth running, low noise: the low-speed motor, make the pump running smoothly, lower noise.
• Vertical structure, cover an area of an area small.
• Import and export of flange can be on the same side, also can be in both sides.

Model Significance

Such as 100DL(R)100-20×3

• 100 - inlet and outlet diameter (mm)
• DL - vertical multistage centrifugal pump
• (R) - hot water type
• 100 - pump design flow rate (m³/h)
• 20 - single stage head (m³/h)
• 3 - level

D 25-50 Multistage High Pressure Pumps 15〜28 m3/h Flow 2.4~2.8 M

Description

• D, DF, DY type horizontal multi-stage centrifugal pump horizontal single-suction multi-stage segmental vertical centrifugal pump.
• Type D is used for conveying liquid without solid particles, the temperature is below 80 ℃ water or similar physical and chemical property of Yu Qingshui liquid.Suitable for mines, factories and urban water supply and drainage engineering.
• Type DF is used for conveying liquid without solid particles, the temperature is -20 ℃ ~ 105 ℃ corrosive liquid.Users according to the name of the medium, concentration, proportion, temperature and reasonable choose the material of pump, such as the pump inlet pressure seal form, the structure of the pump and determine the motor capacity, etc.
• Type DY is used for conveying liquid without solid particles, temperature is -20 ℃ ~ 105 ℃, the viscosity - less than 120 centipoise oil and oil products.

Features

• advanced hydraulic model, high efficiency, wide range of performance.
• pump running smoothly, low noise.
• seal with soft packing seal or mechanical seal, sealing safety and reliability, simple structure, easy maintenance.
• the shaft is a fully sealed structure, to ensure that no contact with the media, not rust, long service life.

Model Significance

Such as D600-60 x 6, DF600-60×6, DY600-60×6
D - multistage centrifugal water pump
DF - corrosion resistance multistage centrifugal pump
DY - multistage centrifugal pump
600 - the design flow rate is 600 m³/h
60 - design point single-stage head is 60 m
6 - series for level 6

DY 120-50 Multistage High Pressure Pumps 110~600 m Head 2950 r/min

Description

• D, DF, DY type horizontal multi-stage centrifugal pump horizontal single-suction multi-stage segmental vertical centrifugal pump.
• Type D is used for conveying liquid without solid particles, the temperature is below 80 ℃ water or similar physical and chemical property of Yu Qingshui liquid.Suitable for mines, factories and urban water supply and drainage engineering.
• Type DF is used for conveying liquid without solid particles, the temperature is -20 ℃ ~ 105 ℃ corrosive liquid.Users according to the name of the medium, concentration, proportion, temperature and reasonable choose the material of pump, such as the pump inlet pressure seal form, the structure of the pump and determine the motor capacity, etc.
• Type DY is used for conveying liquid without solid particles, temperature is -20 ℃ ~ 105 ℃, the viscosity - less than 120 centipoise oil and oil products.

Features

• advanced hydraulic model, high efficiency, wide range of performance.
• pump running smoothly, low noise.
• seal with soft packing seal or mechanical seal, sealing safety and reliability, simple structure, easy maintenance.
• the shaft is a fully sealed structure, to ensure that no contact with the media, not rust, long service life.

Model Significance

Such as D600-60 x 6, DF600-60×6, DY600-60×6
D - multistage centrifugal water pump
DF - corrosion resistance multistage centrifugal pump
DY - multistage centrifugal pump
600 - the design flow rate is 600 m³/h
60 - design point single-stage head is 60 m
6 - series for level 6

Performance

D(DF/DY)120-50 Performance Parameter

Description

• D, DF, DY type horizontal multi-stage centrifugal pump horizontal single-suction multi-stage segmental vertical centrifugal pump.
• Type D is used for conveying liquid without solid particles, the temperature is below 80 ℃ water or similar physical and chemical property of Yu Qingshui liquid.Suitable for mines, factories and urban water supply and drainage engineering.
• Type DF is used for conveying liquid without solid particles, the temperature is -20 ℃ ~ 105 ℃ corrosive liquid.Users according to the name of the medium, concentration, proportion, temperature and reasonable choose the material of pump, such as the pump inlet pressure seal form, the structure of the pump and determine the motor capacity, etc.
• Type DY is used for conveying liquid without solid particles, temperature is -20 ℃ ~ 105 ℃, the viscosity - less than 120 centipoise oil and oil products.

Features

• advanced hydraulic model, high efficiency, wide range of performance.
• pump running smoothly, low noise.
• seal with soft packing seal or mechanical seal, sealing safety and reliability, simple structure, easy maintenance.
• the shaft is a fully sealed structure, to ensure that no contact with the media, not rust, long service life.

Model Significance

Such as D600-60 x 6, DF600-60×6, DY600-60×6
D - multistage centrifugal water pump
DF - corrosion resistance multistage centrifugal pump
DY - multistage centrifugal pump
600 - the design flow rate is 600 m³/h
60 - design point single-stage head is 60 m
6 - series for level 6

D 720-60 High Pressure Multistage Centrifugal Pumps 550~850 m3/h Flow

Description

• D, DF, DY type horizontal multi-stage centrifugal pump horizontal single-suction multi-stage segmental vertical centrifugal pump.
• Type D is used for conveying liquid without solid particles, the temperature is below 80 ℃ water or similar physical and chemical property of Yu Qingshui liquid.Suitable for mines, factories and urban water supply and drainage engineering.
• Type DF is used for conveying liquid without solid particles, the temperature is -20 ℃ ~ 105 ℃ corrosive liquid.Users according to the name of the medium, concentration, proportion, temperature and reasonable choose the material of pump, such as the pump inlet pressure seal form, the structure of the pump and determine the motor capacity, etc.
• Type DY is used for conveying liquid without solid particles, temperature is -20 ℃ ~ 105 ℃, the viscosity - less than 120 centipoise oil and oil products.

Features

• advanced hydraulic model, high efficiency, wide range of performance.
• seal with soft packing seal or mechanical seal, sealing safety and reliability, simple structure, easy maintenance.
• the shaft is a fully sealed structure, to ensure that no contact with the media, not rust, long service life.

Model Significance

Such as D600-60 x 6, DF600-60×6, DY600-60×6
D - multistage centrifugal water pump
DF - corrosion resistance multistage centrifugal pump
DY - multistage centrifugal pump
600 - the design flow rate is 600 m³/h
60 - design point single-stage head is 60 m
6 - series for level 6

Performance

D(DF/DY)720-60 Performance Parameter