Certification
Good quality Centrifugal Slurry Pump for sales
The quality of the product is very good

—— David

A trustworthy manufacturer Later will cooperate

—— Peter

The supplier will pick you up later

—— Lisa

I'm Online Chat Now

double suction centrifugal pump

SOWH Double Suction Centrifugal Pump / Industrial Water Supply Pump Low Noise

  • SOWH Double Suction Centrifugal Pump / Industrial Water Supply Pump Low Noise
Product Details:

SOWH double suction centrifugal pump / industrial water supply pump

 

 

 

Product Overview:

 

SOWH double suction in the centrifugal pump my company to introduce foreign advanced technology development and production of a new generation of products, the pump high efficiency, good anti-cavitation performance, low noise, safe and stable operation, wide range of performance for the water plant , Irrigation and drainage pumping stations, industrial water supply systems, fire systems, shipbuilding industry, oil refining and chemical industry.

Detailed Product Description
Flow: 50~9800m³/h Head: 8~160m
Application: Shipbuilding Industry, Oil Refining, Chemical Industry. Caliber: 80~800mm
Speed: 730~2950 R/min Working Pressure: ≤ 1.6MPa
Motor Power: 3~2000qKW Color: Light Blue

Single Stage Double Suction Centrifugal Pump / Split Case Pump For Handling Slurries

  • Single Stage Double Suction Centrifugal Pump / Split Case Pump For Handling Slurries
Product Details:

8/6 E-AH Single Stage Centrifugal Pump / Warman Pump Parts

 

 

Application and Feature


♣ Type AH Pumps are cantilevered, horizontal, centrifugal slurry pump.
♣ They are designed for the handling high-density slurries in the metallurgical, mining, coal, power, building material and other industrial departments etc.
♣ The pump of this type also may be installed in multistage series.
♣ The frame plates liner and impeller for type AH, M pumps have replaceable wear-resistant metal liners or rubber liners,
The frame plate liner and impeller for HH pump are adaptable of wear-resistant metal only.
♣ The shaft seals Type: Gland seal, Expeller Seal, mechanical Seal
♣ Discharge branch can be positioned at intervals of 45 degrees

 

 

Key benefits


Bearing assembly - a large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.
Liners-easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable with pressure moulded elastomer.
Elastomer seal rings back all liner joints.

 

Casing-Casing halves of the cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety.

 

Impeller-front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and moulded elastomer impellers are completely interchangeable.

Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.

Throatbush-wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.

 

The rubber parts are fully interchangeable with the the alloy parts.

One-piece frame - a very robust one-piece frame cradles the cartridge type bearing and shaft assembly.

An external impeller adjustment mechanism is provided below the bearing housing for easy adjustment of impeller clearance.

 

Material High Chrome alloy or Nature rubber
Size 1-18"
Pump Type Single Stage Single SuctionCentrifugal slurry pumps
Drive ZVz/CRz/CV/DC
Power Motor
capacity 0-5400m3/h
Head 0-118m
Seal Type Mechanical seal, packing seal , expeller seal
MQQ 1 set
Sample Time Within 15 days
OEM Accepted Yes
Package Free fumigation wooden cases
Payment term TT , west union, Money gram

 

S Type Double Suction Horizontal Split Case Pump Single Stage High Speed

  • S Type Double Suction Horizontal Split Case Pump Single Stage High Speed
Product Details:

S type single-stage double-suction centrifugal pump For fire protection system

 

 

Uses

 

S, SH single-stage double suction level in the open centrifugal pump for the delivery of water and physical and chemical substances similar to the water, the media maximum temperature of 80 ℃, the bearing body Through the cooling water pressure, can be transported below 130 ℃ hot water.

 

 

Product description

 

S, SH single-stage double suction level in the open centrifugal pump for the delivery of water and physical and chemical substances similar to the water, the media maximum temperature of 80 ℃, the bearing body into the cooling water pressure, can transport 130 ℃ below the hot water The Change the sealing ring, sleeve and impeller material, can be transported with muddy muddy water.

S series of open pump shaft seal generally use soft packing seal, plus special requirements, but also modified mechanical seal, from the motor side to see the pump, S-pump for clockwise rotation, SH-type pump for counterclockwise rotation. S, SH pump diameter of less than 300mm (including 300mm) or motor power less than 100KW, can be equipped with a common base when ordering to be explained.

 

 

Model meaning

 

250S-65A

250: pump inlet diameter of 250mm

S: single stage double suction horizontal centrifugal pump

65: head for 65m

A: Impeller first cut

Single Stage Double Suction Centrifugal Pump For Urban Water Supply

  • Single Stage Double Suction Centrifugal Pump For Urban Water Supply
Product Details:

Performance and advantages

 

S/SH type in the pump suction and discharge are in the pump under the axis line, perpendicular to the axis into the horizontal direction. Easy maintenance, no need to dismantle into and out of the water pipes and motors, energy efficient, the wide range of applications.

 

S-type single-stage double suction level in the open centrifugal pump is a new energy-saving horizontal open pump, mainly by the pump, pump cover, shaft, impeller, seal ring, sleeve, bearing parts and other components, the suction and discharge Are under the pump axis line, maintenance, as long as the pump cover opened, you can remove all parts for maintenance. For the delivery of water or other physical and chemical properties similar to the water, according to user needs, by changing the pump structure and material can be used to transport more sediment water or all kinds of corrosive liquids. It's performance in line with JB / 1050-93 "single suction double suction centrifugal pump type and basic parameters" standard.

 

 

Model Meaning:

 

300 S 90 A

300 - Diameter of inlet (mm)

S - single - stage double - suction centrifugal pump

90 - design head (m)

A - Impeller is first cut

 

 

Technical Parameters

 

Model Flow Q
( m 3 /h)
Head H
(m)
Speed n
(r/min)
Power (KW) Efficiency η
(%)
Net Positive Suction Head (NPSH)r(m) Remark (old model)
Shaft Power Motor Power
100S90 80 90 2950 30.1 37 65 2.5  
100S90A 72 75 23 30 64 2.5  
150S100 160 100 59.8 75 73 3.5  
150S78 160 78 45 55 73.5 3.5 6sh-6
150S78A 144 62 33.8 45 72 3.5 6sh-6 A
150S50 160 50 27.3 37 80 3.9 6sh-9
150S50A 144 40 20.9 30 75 3.9 6sh-9 A
150S50B 133 36 18.6 22 70 3.9 6sh-9B
200S95A 280 95 91.7 110 79.2 5.3 8sh-6A
200S95B 270 75 73.5 90 75 5.3 8sh-6B
200S63 280 63 58.3 75 82.7 5.8 8sh-9
200S63A 270 46 45.1 55 75 5.8 8sh-9 A
200S42 280 42 38.1 45 84.2 6 8sh-13
200S42A 270 36 33.1 37 80 6 8sh-13A
250S65 485 65 1450 109 132 78.6 3 10sh-6
250S65A 468 54 89.4 110 77 3 10sh-6A
250S39 485 39 61.5 75 83.6 3.2 10sh-9
250S39A 468 30.5 49.3 55 79 3.2 10sh-9 A
250S24 485 24 36.9 45 85.8 3.5 10sh-13
250S24A 414 20.3 27.6 37 83 3.5 10sh-13 A
250S14 485 14 21.5 30 85.8 3.8 10sh-19
250S14A 432 11 15.8 18.5 82 3.8 10sh-19A
300S110 790 110 295.7 440 80 4  
300S90 790 90 242.8 315 79.6 4 12sh-6
300S90A 756 78 217 280 74 4 12sh-6 A
300S90B 720 67 180 220 73 4 12-sh6B
300S58 790 58 149.9 180 84.2 4.4 12sh-9
300S58A 720 49 118.6 160 81 4.4 12sh-9A
300S58B 684 43 100 132 80 4.4 12sh-9B
300S32 790 32 79.2 110 86.8 4.6 12sh- 13
300S32A 720 26 60.7 75 84 4.6 12sh-13A
300S19 790 19 47 55 86.8 5.2 12sh- 19
300S19A 720 16 39.2 45 80 5.2 12sh-19A
300S12 790 12 30.4 37 84.8 5.5 12sh-28
300S12A 684 10 3.9 30 78 5.5 12sh-28 A
350S125 1260 125 534 710 80.5 5.4 14sh-6
350S125A 1181 112 462 630 78 5.4 14sh-6A
350S125B 1098 96 373 500 77 5.4 14sh-6B
350S75 1260 75 303 355 85.2 5.8 14sh-9
350S75A 1170 65 247 280 84 5.8 14sh-9A
350S75B 1080 55 197 220 82 5.8 14sh-9B
350S44 1260 44 173 220 87.5 6.3 14sh-13
350S44A 1116 36 131 160 84 6.3 14sh-13A
350S26 1260 26 102 132 87.5 6.7 14sh-19
350S26A 1116 21.5 78.8 90 83 6.7 14sh-19A
350S16 1260 16 64.5 75 85.3 7.1 14sh-28
350S16A 1044 13.4 48.8 55 48 7.1 14sh-28A
500S98 2020 95 970 678 800 79.5 4 20sh-6
500S98A 1872 83 540 630 78.5 4 20sh-6A
500S98B 1746 74 452 560 78 4 20sh-6B
500S59 2020 59 391 450 83 4.5 20sh-9
500S59A 1872 49 333 400 75 4.5 20sh-9A
500S59B 1746 40 257 315 74 4.5 20sh-9B
500S35 2020 35 219 280 88 4.8 20sh-13
500S35A 1746 27 151 220 85 4.8 20sh-13A
500S22 2020 22 144.1 185 84 5.2 20sh-19
500S22A 1746 17 101 132 80 5.2 20sh-19A
500S13 2020 13 86.2 110 83 5.7 20sh-28
600S75 3170 75 727 800 89 7.5 24sh-9
600S75A 2880 65 580 630 88 7.5 24sh-9A
600S47 3170 47 465 560 88 7.5 24sh-13
600S32 3170 32 310 400 89 7.5 24sh-19
600S32A 2880 27 238 280 89 7.5 24sh-19A
600S22 3170 22 223 280 85 7.5 24sh-28
600S22A 2880 18.2 168.5 200 84.5 7.5 24sh-28A
800S32 5500 32 730 700   84   32sh-19
800S-32A 5310 29 570   84   32sh-19
 

Double Suction Split Case Pump Single Stage Centrifugal Pump For Transmission Medium Flow

  • Double Suction Split Case Pump Single Stage Centrifugal Pump For Transmission Medium Flow
Product Details:

Factories Double Suction Split Case Pump inlet diameter of 250mm

 

Uses:

 

The double suction pump is also known as a single-stage double suction centrifugal pump, the main feature for the transmission medium flow, mainly for factories, cities, Power stations, water conservancy projects, irrigation and other drainage or water supply pump. The transport of solid particles can not exceed the diameter of 10mm, the content can not exceed 5%.

 

Product description

 

Double suction in the pump is also known as a single-stage double suction centrifugal pump, the main feature of the transmission medium flow, head, in the open pump operation principle: impeller installed in the pump shell and fastened to the pump shaft On the pump shaft directly driven by the motor. There is a liquid suction in the center of the pump housing connected to the suction pipe.

 

Wei-pump production of the double suction pump is a horizontal centrifugal pump, the type of pump with a flow range than the IS-wide, the head is not very high characteristics, mainly for factories, cities, power plants, water conservancy projects, Farmland irrigation and other drainage or water supply pump. The transport of solid particles can not exceed the diameter of 10mm, the content can not exceed 5%. Pump delivery medium temperature can not exceed 80 ℃, the inlet pressure can not exceed 0.6Mpa.

 

 

Structure Introduction

 

The pump suction and discharge are in the pump under the axis of the axis, the horizontal direction and the axis into a vertical position, the pump shell open, maintenance without disassembly of water, discharge pipes and motors (or other prime movers) from the joint Shaft to the direction of the pump looked, the pump are clockwise rotation, the pump inlet on the right. Such as according to the user special order needs can also be changed counterclockwise rotation.

 

The main components of the pump, pump cover, impeller, shaft, double suction ring, sleeve, bearings and so on. In addition to the shaft material for high-quality carbon steel, the rest are made of cast iron. But according to the needs of the user axis can be changed to stainless steel, stainless steel and other material pump body and pump cover can also be.

 

The pump body and the pump cover constitute the impeller working chamber, in the inlet and outlet of the flange on the installation of the vacuum gauge and pressure gauge pipe screw hole. The impeller is calibrated by static balance, fixed with the sleeve and the sleeve nuts on both sides. The axial position can be adjusted by the sleeve nut. The axial force of the impeller is balanced with its symmetrical arrangement of the blades, and there may be some remaining The axial force is the bearing of the coaxial end. The pump shaft is supported by two single row radial ball bearings, which are mounted on the bearing body at both ends of the pump body and lubricated with butter. The double suction seal ring is used to reduce the water in the pump water chamber.

 

The pump is directly driven by the motor through the coupling, the shaft seal is a soft packing seal, and the other material and mechanical seal can be used according to the different media. In order to cool the lubricating seal chamber and prevent the air from leaking into the pump, there is a water seal ring between the packing, and the water pump works with a small amount of high-pressure water flowing through the water seal tube into the packing chamber.

Model meaning

double suction in the pump model with the S / SH type pump

 

250S-65A

250: pump inlet diameter of 250mm

S: single stage double suction horizontal centrifugal pump

65: head for 65m

A: Impeller first cut

 

10SH-13A

10: 1/25 of the suction diameter (mm) (the pump suction diameter is 250 mm)

SH: single stage double suction horizontal centrifugal pump

13: pump than the number of revolutions of 1/10

A: Impeller first cut

 

Contact Details
Shijiazhuang JieMu Machinery Equipment Co.,Ltd

Contact Person: Mr.

Tel: 86-311-80660278

Send your inquiry directly to us (0 / 3000)