Home ProductsMission Magnum Pump

mission magnum centrifugal pumps

Certification
Good quality Centrifugal Slurry Pump for sales
The quality of the product is very good

—— David

A trustworthy manufacturer Later will cooperate

—— Peter

The supplier will pick you up later

—— Lisa

I'm Online Chat Now

mission magnum centrifugal pumps

Mission Magnum Centrifugal Pumps 3×2×13 For Deliver Strong Abrasion Mud

  • Mission Magnum Centrifugal Pumps 3×2×13 For Deliver Strong Abrasion Mud
Product Details:

×2×13 Mission Magnum Centrifugal Pumps 1448/1748 rpm Flow

 

 

 

3×2×13 mission centrifugal sand pump is usually used as the clean water pump.

 

Product introduction

 

  • This series of pumps is fully available with mission, now we and MCM pumps, mud pumps have been developed for large power, large displacement, high pressure. Full set of American pump clay technology.
  • The mud pump delivers strong abrasion, high density, low density, high lift mud, thick wear resistant parts and heavy support. In the allowable range of pump operating pressure, the pump can be connected in series to achieve high lift.
  • Because the design parameters of the gear are unreasonable, the operation of the pump will produce greater noise, which will affect the operation of the pump. The cross head of the mud pump is made of advanced wear resistant material. It adopts special processing method without deformation, high precision and strict tolerance.
  • The series of centrifugal mud pumps and slurry pumps are fully United States technology. The pump flow is from 2 to 12". The design of this pump is better than that of ANSI B73.1 standard chemical process pump, they use barite and mineral oil base drilling mud, bentonite, brine cement slurry, cement, paper making, mine drainage and so on.
  • High chromium cast iron slurry pump, slurry pump parts, high power, large displacement, high pressure.
  • DN:1 - - 10"
  • Q: the maximum is 1400 cubic meters per hour
  • H:max142m
  • Medium temperature: 25 degrees C + 140 degrees C
  • System pressure: 25bar

 

 
Mission Centrifugal Pump Parameters
 
Model Discharge Capacity Head Efficiency Power speed Inlet Diameter Outlet Diameter Weight Appearance Size,mm
3×2×13 50~60m3/h 22~28m 0.65 7.5/11 kW 1450/1750rpm 3″ 2″ 365/420kg 1388×482×609
/1513×482×674

 

 

Industrial 10x8x14 Mission Magnum Centrifugal Pumps with 27.9~32.9 M Head

  • Industrial 10x8x14 Mission Magnum Centrifugal Pumps with 27.9~32.9 M Head
Product Details:

Description

 

  • The Mission MAGNUM I has been engineered for the toughest jobs in drilling, production, well-servicing, and industrial applications.The revolutionary design of the MAGNUM I provides supreme-duty performance in all types of fluid pumping operations. Although it offers greater capacity and higher heads, the MAGNUM I remains the competitive pump of choice for aggressive applications.
  • Ability: 25-450m3 / hr; head: 11-40m; speed: 1440-1480rpm; 1750rpm; motor power: 4-110kw;
  • Centrifugal pump centrifugal pump life: 1 years of OEE series power supply is ideal desander, desilter, jet mud mixer, slurry pump, charging is the feed pump head.
  • There are six modes of SB series centrifugal pumps, the engine power range from 4kw 110kw. The centrifugal pump is in the unit engineering structure or belt transmission structure, applies to the 50Hz and 60Hz power grid. It also has metric and British standards, clockwise and counter clockwise. Some types of sand pumps can be interchanged with similar sand pumps.
  • The utility model is suitable for mud transportation in the fields of ore, metal smelting, dredging, dredging, river dredging, etc.. Special impeller improves centrifugal pump efficiency and energy saving by 10%. The centrifugal pump adopts high wear resistant cast iron to improve its service life by 50%. Front door structure convenient for installation and maintenance of centrifugal pump.
  • Now widely used in overseas markets, including the United States (Nabors), Russia, the south, the United States, Central Asia and the middle east. The OEE sand pump is a horizontal, single shell centrifugal pump designed for continuous handling of the most difficult, strongly abrasive, oversized solids that are pumped by ordinary pumps.
  • If you need our products competitive price and fast delivery, please contact us. We provide you with the most timely assistance.

Pump Parameters

 

 

Model Discharge Capacity Head Efficiency Power speed Inlet Diameter Outlet Diameter Weight Appearance Size
10×8×14 260~300m3/h 28~33 0.65 75/90 kW 1450/1750rpm 10″ 8″ 1060/1140kg 2007×701×950
/2065×701×1015

 

 

Mission Magnum Pumps 6×5×14 For Transporting High Viscosity Drilling Fluid

  • Mission Magnum Pumps 6×5×14 For Transporting High Viscosity Drilling Fluid
Product Details:

Common application


Barite, ferric oxide and mineral oil base drilling muds
Glass fibers
Sugar processing
Ash or coal conveyors
Cement
Minede-watering
Lime slurries

 

Features

 

  1. Open impeller, suitable for transporting high viscosity of drilling fluid;
  2. The combination sealing, long service life;
  3. All types of centrifugal pump bearing, shaft parts etc interchangeable, easy maintenance, saving cost;
  4. The main components are wear resistant ductile iron, precision casting resin sand, long service life, beautiful appearance.

Mission Magnum Centrifugal Pumps 8×6×11 For Oil Drilling Cycle Solid Control Systems

  • Mission Magnum Centrifugal Pumps 8×6×11 For Oil Drilling Cycle Solid Control Systems
Product Details:

Features

 

  • Mission centrifugal pumps have been shown to be the best centrifugal design for handling slurries. These pump series offer a wide range of options for innovative functions in a variety of conventional, demanding, abrasive and corrosive applications. All pumps are used to construct high quality components and parts, and all the 100 dimensions of the same universal task 2500 is the highest, SPD Beck mud for 2.5 / 1.1, MCM 250, Derrickk 250 series, double life premium of 250, xbsy, TSC, victory, 31 hard disk tp-2500c, mattco, cobra pump and Dragon 250, Kazakhstan risbourg, prominent TSC hcp.etc.
  • It has an open impeller design that contains a wide range of vanes and more tangential suction, which allows the pump to create smoother flow patterns when handling abrasive fluids. The material consists of hard ductile iron, high chromium alloy, stainless steel and aluminum bronze hydraulic ends. The pump can be motor, diesel engine, hydraulic motor (horizontal, vertical, or tight coupling configuration). Sizes from 3x2x13 to 10x8x14.

 

 

Application and scope

 

Is mainly used for oil drilling cycle solid control systems, its role is to desander, except for mud mixer, etc. provide a certain displacement and pressure, to ensure the equipment work efficiently. 8×6×11 centrifugal sand pump 3000m drilling machine, can also be used as a pump to the three cylinder mud pump for slurry;

 

High Chrome Mission Centrifugal Pump 5X4X14 Wear Resistant Long Service Life

  • High Chrome Mission Centrifugal Pump 5X4X14 Wear Resistant Long Service Life
Product Details:

 

5×4×14 centrifugal mission sand pump applies to truck-mounted drilling rigs or pocket drilling rigs

 

 

Structure characteristics


The centrifugal pump is mainly composed of a pump casing, impeller, pump shaft, wear plate, seal, bearing, bearing, coupling, motor and the base.

 

The characteristics of the series is centrifugal pump:


1. open impeller, suitable for conveying high viscosity drilling fluid;
2. combination seal, long service life;
3. all the bearings, shafts and other parts of the centrifugal pump are universal, convenient for maintenance and cost saving;
4., the main parts are wear-resistant ductile iron, resin sand precision casting, long service life, beautiful appearance.

Contact Details
Shijiazhuang JieMu Machinery Equipment Co.,Ltd

Contact Person: Mr.

Tel: 86-311-80660278

Send your inquiry directly to us (0 / 3000)