Certification
Good quality Centrifugal Slurry Pump for sales
The quality of the product is very good

—— David

A trustworthy manufacturer Later will cooperate

—— Peter

The supplier will pick you up later

—— Lisa

I'm Online Chat Now

mission mud pumps

Industrial Mission Mud Pumps , Mining Slurry Pump Mechanical Seal Sealing

  • Industrial Mission Mud Pumps , Mining Slurry Pump Mechanical Seal Sealing
Product Details:

Description

 

  • Slurry pump structure: L type slurry pump for light cantilever, axial horizontal double suction centrifugal slurry pump. The outlet position of the pump can be installed at eight different angles according to the requirement and rotated at 45 DEG C intervals.
  • Slurry pump material: L light duty slurry pump body with replaceable wear-resistant metal lining, impeller, sheath, retaining plate and other over-current components are wear-resistant metal.
  • Slurry pump: compared with heavy duty slurry pump, the pump has high rotational speed, small size and light weight. It is suitable for conveying fine particles, low concentration slag slurry or corrosive slag slurry. The weight of the slurry is generally not more than 30%, and it can also be used to transport high concentration and low abrasive slurry.
  • Seal type: L type pump seals can use packing seal, Deputy impeller seal, packing plus side impeller seal, mechanical seal and other types.
  • Drive type: DC direct drive, CR parallel belt drive, ZVZ upper and lower belt drive, CV vertical belt drive and other types.

 

 

Applications

 

  • Thickener Overflow
  • Paper and Pulp
  • Slag Granulation

Structure & Material

 

 

The numbers of the main parts

 

032:Frame Plate
060: Intake Joint
132:Discharge Joint
083:Throat bush
110:Volute Liner
147: Impeller
122: Stuffing Box Seal
036: Frame Plate Liner
013:Cover Plate
018:Cover Plate Liner
124: Volute Cover Seal
041: Frame Plate Liner Insert

 

  LINERS IMPELLERS CASING BASE EXPELLER EXPELLER RING SHAFT SLEEVE SEALS
Standard Chrome Alloy
Natural Rubber
Chrome Alloy
Natural Rubber
SG Iron SG Iron Chrome Alloy
or
SG Iron
Chrome Alloy
or
SG Iron
SG Iron Rubber
and
Nitrile
Options Acid Resist™Neoprene
Butyl
Nitrile
Hypalon
Acid Resist™Neoprene
Butyl
Nitrile
Hypalon
N/A MS
Fabricated
Acid Resist™ Acid Resist™ Acid Resist™ Neoprene
Viton

 

PERFORMANCE

 

Type Allowable Mating Max. Power(Kw) Clear Water Performance Impeller
Capacity/Q m³/hr Head/m Speed/rpm Max Efficiency/% NPSH/m Nos of Vane Impeller Diameter/mm
                 
200E-L 120 234--910 9.5--40 600--1100 64 3-6 4 457
250F-L 120 396--1425 8--30 500--800 77 2--10 5 550
300S-L 560 468--2538 8--60 400--950 79 2-10 5 653
350S-L 560 650--2800 10--59 400--840 81 3--10 5 736
400ST-L 560 720--3312 7--51 300--700 80 2--10 5 825
450ST-L 560 1008--4356 9--48 300--600 80 2--9 5 933
550TU-L 1200 1980-7920 10-50 250-475 86 4-10 5 1213

 

 

6×5×11 Mission Mud Pumps Centrifugal Pumps 120~201 M3/H Flow With Desander And Desilter

  •  6×5×11 Mission Mud Pumps Centrifugal Pumps 120~201 M3/H Flow With Desander And Desilter
Product Details:

Features

 

  • Mission sand pump is used to provide drilling fluid with desander and desilter, in addition to the mud pump discharge capacity and pressure. The centrifugal pump through the field application and improvement of more than 10 years, in the domestic advanced level, both in the technical performance and seal life, reach the level of similar foreign products.
  • The mission centrifugal pump / pump centrifugal pump pump / task 2500 highest, the main task of sand / pump centrifugal pump
  • Casing, casing, washer, nut, stud, casing, casing, casing plug / washing / line / impeller impeller seal, gasket, bolt / impeller, impeller lock packing box, stuffing seal / mechanical / packaging / / / nozzle / bolts, stuffing box cover assembly / packaging / mechanical seal packing / BackupPacking / shaft / Zhang ring - Latemu / bolt assembly, gland / sleeve / seal / sleeve / oil ring and pin board / component / framework grease / plug leakage / bolt / breather frame Jack cover/ bearing inner casing/Gasket / cover oil seal / fitting / bearing, inner / nut / cover, O ring / oil seal / washer / lock nut​

High Power Mission Centrifugal Pump 4×3×13 For Mining / Construction Industry

  • High Power Mission Centrifugal Pump 4×3×13 For Mining / Construction Industry
Product Details:

4×3×13 mission centrifugal sand pump is usually used as measuring pump or replenishment pump

 

 

 

Product introduction

 

  • Mission pump, a reliable, high power, low cost mud pump. Unique concentric round shell and wide impeller design, so that the centrifugal pump shows a wear resistance, long service life characteristics, and the use of maintenance costs are very low. Concentric circles are designed to reduce vibration and turbulence, because they cause great wear when pumped into drilling fluids containing solid solids. This design can also relieve high load and shaft deviation of pump.
  • The wide impeller design of the mission pump can reduce the speed of the liquid from the blade, and the design of the narrow blade will make the hard substance of the drilling fluid exert a great impact on the blade, while the wide blade design will not happen.
  • In addition, the MISSION pump is also equipped with a large load shaft, larger than the average diameter of the pump, but also extended the service life. You can even connect the shaft with the belt directly to drive the centrifugal pump.
  • The main material of MISSION pump is high hardness steel, stainless steel and bronze. It can be driven by an electric motor, a diesel engine or a hydraulic motor. We can provide the whole machine or separate pump head and fittings to meet the needs of users

 

 

Features

 

Mission universal control silica sand pump for mining and construction, papermaking, textile, food, feed and other industries;

 

The mission of universal pump function:

  1. Single stage single suction
  2. Haft open impeller
  3. Anti abrasive material, high chromium alloy (flow part)
  4. The impeller is adjustable with the protection plate.
  5. Marx density: 50-60 (by weight)
  6. Easy installation
  7. Efficient work

 


Pump Parameters

 

Model Discharge Capacity Head Efficiency Power speed Inlet Diameter Outlet Diameter Weight Appearance Size,mm
4×3×13 60~80m3/h 22~28m 0.65 11/15 kW 1450/1750rpm 4″ 3″ 435/450kg 1531×495×674
1571×495×674

8×6×14 Chemical Centrifugal Pump For Mineral Oil Base Drilling Muds

  • 8×6×14 Chemical Centrifugal Pump For Mineral Oil Base Drilling Muds
Product Details:

8×6×14 centrifugal sand pmp applies to over 3000-meter-long drilling rigs

 

Working principle:

 

Turn the pump motor drive through a coupling shaft, the shaft drives the impeller to rotate, drilling fluid by the suction port of the suction from the impeller through the central channel impeller, under the action of centrifugal force, energy and speed, the pump shell continuously from the outlet to the working machine.

 

 

Common application

 

Barite,

ferric oxide and mineral oil base drilling muds
Ash or coal conveyors
Lime slurries

6×5×14 Mission Mud Pumps Magnum Pumps For Minede Watering / Lime Slurries

  •  6×5×14 Mission Mud Pumps Magnum Pumps For Minede Watering / Lime Slurries
Product Details:

Common application


Barite, ferric oxide and mineral oil base drilling muds
Glass fibers
Sugar processing
Ash or coal conveyors
Cement
Minede-watering
Lime slurries

 

Features

 

  1. Open impeller, suitable for transporting high viscosity of drilling fluid;
  2. The combination sealing, long service life;
  3. All types of centrifugal pump bearing, shaft parts etc interchangeable, easy maintenance, saving cost;
  4. The main components are wear resistant ductile iron, precision casting resin sand, long service life, beautiful appearance.
Contact Details
Shijiazhuang JieMu Machinery Equipment Co.,Ltd

Contact Person: Mr.

Tel: 86-311-80660278

Send your inquiry directly to us (0 / 3000)